Flush Door vs Wooden Panel Door – 21 Important Difference

Flush Door vs Wooden Panel Door

Flush Door vs Wooden Panel Door:- Whenever we build a house, there is often confusion about what kind of door and what kind of design door we should put in our house. Nowadays, only two types of doors are most popular in the market: the first is the flush door, and the second is wooden panel doors.

 

In this article, we will discuss the differences between Flush doors vs wooden panel doors.

 

So Let’s Start

1). Piece Of Wood

 

 

 

The flush door is made up of a single solid piece of wood.

 

Whereas,

 

Wooden panel doors come in single panels, double panels, three panels, four panels, five panels, six panels, etc.

2). Concept

The flush door is flat on both sides and it does not contain any panels. Flush doors consist of timber frames and solid wood strips are placed edge to edge in between the frame as a solid core material.

 

These solid cores are general particle board or timber and an outer face sheet of plywood or veneer or MDF or laminate can be used. The edges of flush doors are usually lit with hardwood.

 

Whereas,

 

Panel door consists of panels that are installed between styles and rails from the outside frame of the door. styles are the vertical lengths of wood and rails are the horizontal length of wood.

3). Appearance

Flush doors have limited designs and appearance wise they are less attractive than panel doors as it has a plane surface on both sides however with varieties of veneer and laminate now available they also can be made attractive and look like natural wood.

 

Whereas,

 

Panel doors are aesthetically more appealing than flush doors however it will depend on quality and design.

 

 

4). Construction

Flush doors are simpler in construction.

 

Whereas,

 

Panel doors are complicated and difficult to construct. A skilled person is required to construct this type of door.

5). Types

The types of timber flush doors are solid core flush doors, hollow core flush doors, and cellular core flush doors.

 

Whereas,

 

In the case of wooden panel doors, there are no such types.

6). Manufacturing

 The flush doors are factory-made.

 

 

 

Whereas,

 

Panel doors can be manufactured on-site as well as factory and its manufacturing is cumbersome.

7). Time For Manufacturing

The manufacturing of flush doors does not take so much time the only thing to be taken care of in flush doors is that they are made as per precise measurements.

 

Whereas,

 

The manufacturing of panel doors demands a lot of detailing and precision which is time-consuming.

8). Method Of Manufacturing

The flush door is manufactured using a wooden framework consisting of solid core materials and has got the finishing of plywood on top.

 

Whereas,

 

The manufacturing of panel doors is done in a traditional way by using a lot of joineries which include style, rails, etc.

9). Strength

The strength of a flush door depends on the quality of wood used in manufacturing the door. If a flush door is made up of poor-quality artificial wood then its strength can be less than panel doors but it doesn’t mean that all flush doors have less strength.

 

Whereas,

 

Panel doors have high strength as compared to flush doors as they are made from natural wood.

10). Hardware Holding Strength

 

 

The capacity of flush doors to hold screws, locks, fixtures, etc. is not as good as panel doors as they are made from different – different layers of artificial wood.

 

Whereas,

 

Panel doors have better hardware holding strength as compared to flush doors.

11). Sound Insulation

 

 

It means the ability of the material to reduce sound transmission.

 

Flush doors are good insulators of sound. They provide privacy in the home as they have better soundproof material.

 

Whereas,

 

Panel doors are not good sound insulators.

12). Fire Resistance

 

 

Flush doors are fire-resistant.

 

Whereas,

 

Wooden panel doors are more prone to fire.

13). Moisture Resistance

 

 

Flush doors are less resistant to moisture as top veener or laminate or plywood starts De laminating due to the effect of moisture.

 

Whereas,

 

Panel doors are more resistant to moisture as compared to flush door.

14). Stain Resistance

 

 

Flush doors have high resistance to stains as it has a plane surface on both sides.

 

Whereas,

 

Panel doors are less resistant to stains as panel doors have grooves in which dust gets accumulated.

15). Termite Resistance

Flush doors have high resistance against termite.

 

Whereas,

 

Panel door are less resistance to termites as they are made up of natural wood.

16). Maintenance

Flush doors have plane shutters so they are easy to clean and maintain.

 

Whereas,

 

Panel doors require more maintenance as the take more time for cleaning because of grooves.

17). Polishing And Painting

In case of flush door if you have laminate on top then there is no question of polishing or painting but if you have a veener on top then polishing & painting may be required.

 

Whereas,

 

Panel doors require periodic polishing and painting.

18). How They Are Sold

Flush doors are sold mostly in a bare form which requires further finishing, painting, or varnishing.However some manufacturers provide readymade finish door with door frames.

 

Whereas,

 

Panel doors are sold in a finished form and the only part left to be done after buying the door is completing the installation of the door.

19). Use

Flush doors can be used as interior as well as exterior doors.

 

Whereas,

 

Panel doors provide more security and privacy hence they are generally used as exterior door.

20). Life

The life of flush doors is less than paneled doors and it depends on quality and type of door.

 

Whereas,

 

The life of panel doors is more than flush doors.

21). Cost

The flush door is simple in design and hence less expensive and easy to produce. Many times flush doors do not come with door frames or when they do these frames are often costlier than frames that typically come with panel doors as a single cell.

 

For your reference I will tell you the rate of 30mm flush door of century make which is approximately Rs.145/sqft.

 

Whereas,

 

Panel doors are costly as compared to flush doors as they are made with lot of natural wood.

 

The rate of wooden panel door for exterior starts from Rs.180/sqft. and for interior it starts from Rs.145/sqft.

Conclusion

Now the question is which one is better – Flush Door vs Wooden Panel Door.

The answer is both these stores are available in the market. So it all depends on your need & budget.

 

Common Doors Purchase Link:-

 

 

 

 

 

 

 

 

 

 

Thanks For the Great Attention!

 

Also, Read,

Duco Paint VS PU Paint

UPVC vs Aluminium vs Wooden Windows

Veneer V/s MDF

MDF vs HDF vs HDHMR

 

Related Video,

Flush Door vs Wooden Panel Door